Swing Doors

TORMAX Swing Door Systems offer the right drive for any type of swing door application. Operating almost unnoticeably, our swing door drives are easy to service, and meet all building code requirements. Automatic detection of obstacles, safe manual operation in the event of a power loss, and the capability of fitting the door with a panic breakaway device for emergency egress are only a few of the many safety characteristics of our swing door systems. Installation is possible on the overhead lintel, concealed overhead or even concealed in the floor, taking minimum time to fit, either when installing new doors or retrofitting existing ones. They are available for standard single, double and specialty doors.

A TORMAX swing door system makes no compromises-either in terms of aesthetics or functionality. The compact, discreet design blends into the architecture of any structure. Because our doors are "self-learning", a door can be brought into service quickly and easily.

Swing Door

 

iMotion 1301 Swing Door Example

 

iMotion 1301 Swing Door Operator

 

The iMotion® 1301 Swing Door Operator is the ideal solution for retrofit applications and is easily installed due to the unique back-plate design. Models are available for single, pair and double egress applications and can be configured to existing doors with butt/offset or center pivoted hinges, swinging either out or in without breakaway.

The iMotion® 1301 Swing Door Operator is a fully programmable dual purpose operator with heavy duty mechanics. The iMotion® 1301 Swing Door Operator incorporates a powerful wear free 1/3 HP AC Synchronous motor with a rack and pinion transmission that is coupled with the intelligent iMotion® microprocessor controller. The result is a smooth whisper quiet trouble free swing door operator that provides long lasting performance and efficiency with the following features:

 

  • The most advanced swing door operator in the world today: iMotion® 1301.
  • Programmable iMotion® microprocessor control that provides flexibility during system configuration.
  • Unlimited application flexibility, provides for personalized programming, exceptional safety and monitoring features
  • Simple operator adjustments due to “Teach-In” a self-learning door control commissioning program, establish door opening and closing movements without the use of maintenance prone cams, magnets and/or mechanical switches
  • Auto-diagnostics for quick and easy trouble shooting.
  • ANSI/UL 325 & 228 (fire) listed for both United States and Canada
  • Dual purpose operator, meets ANSI standards A156.10 and ANSI standards 156.19

 

Features & Benefits

Brochure

Drawing

Single
Pairs
Dual Independent Operation
Double Egress

Specs

iMotion 1302 Swing Door Example

 

Overhead Concealed Unit designed specifically for new construction with a wide variety of market specific applications. Models are available for single, pair and dual applications. The unit adapts to center pivoted doors swinging either out or in with or without panic breakaway. TORMAX offers a complete line of door systems, featuring narrow or medium stile doors with or without framing systems.

The Overhead Concealed Unit features the iMotion® 1302 Swing Door Operator with its powerful wear free 1/5 horse power AC synchronous motor coupled with the intelligent iMotion® control processor. The system can be configured to meet ADA requirements for low energy power operated doors as well as high energy power operated pedestrian doors.

 

  • A self-learning iMotion® processor control system which ensures reliable and safe operation.
  • Simple operator adjustments due to the "teach-in" function of the control system.
  • Maintenance free components in the motor and gear box reduce ownership costs and ensure trouble free operation. There are no maintenance prone magnets and mechanical switches required for door position status.
  • Automatic diagnostics for quick and easy troubleshooting.
  • The most advanced swing door operator in the world today: iMotion® 1302.

 

System

Features & Benefits

Brochure

Drawing

Single With Narrow Stile Door and Frame
Pairs With Narrow Stile Doors and Frame
Dual With Narrow Stile Doors and Frames

Specs

Operator

Features & Benefits

Brochure

Drawing

Inswing
Right Hand 
Inswing
Left Hand 
Outswing
Right Hand 
Outswing
Left Hand 
Inswing
 
Outswing
 
Continuous Header
 
Independent Headers
 
Bottom Pivot Details and Threshold Options
 
Swing Door Preparation Details
 

Specs

TORMAX 1201 Swing Door Example

 

TORMAX 1201 Swing Door Operator

Side Load Cover

Swing Door Operator Slim Line Cover

Slim Line Cover

Swing Door Operator Slim Line Cover

Slim Line Cover

The Tormax 1201 Swing Door Operator is the ideal solution for retrofit applications and is easily installed due to the unique back-plate design. Models are available for single, pair and double egress applications and can be configured to existing doors with butt/offset or center pivoted hinges, swinging either out or in without breakaway.

The Tormax 1201 Swing Door Operator is a fully programmable dual purpose operator with heavy duty mechanics that meets ANSI standards A156.10 and ANSI standards 156.19. The Tormax 1201 is a non-handed power open, spring close mechanical operator capable of swinging interior and exterior doors up to 55" wide, weighing up to 550 pounds. The Tormax 1201 Swing Door Operator incorporates a 1/3 HP DC motor with reliable rack and pinion mechanics coupled with a programmable microprocessor controller. The result is a smooth quiet trouble free swing door operator that provides long lasting performance and efficiency.

First Class with Luxury Features!

By means of the programmable microprocessor controller the intelligent self-learning swing door operator will auto-configure to meet your specific application requirements. At what speed should the door open? How wide should it open? How long should it remain open? How fast should it close? The Tormax 1201 Swing Door Operator is a modular drive of superior Tormax quality and unmatched features. The basic unit allows for 24VDC activator, two push plates and a reactivation sensor. On-board provisions for door status, battery backup and additional modules. The basic unit comes standard with built-in "Open/Timeout/Close", "Sequential", "Push and Pull" and "Power Assist Close" functionality. Additional functionality can be simply added via on-board modules as required by application and or by design. The system provides for auto-diagnostics for quick and easy trouble shooting. ANSI/UL 325, UL 10C/NFPA252/ULC S104, & UL 228/ULC S133 listed for smoke and fire door applications for both United States and Canada. Fire rated drive assemblies are available with a 3-hour fire resistance rating.

Features & Benefits

Brochure

Drawing – TORMAX 1201 "Side Load"

Single
Pairs
Dual Independent Operation
Double Egress

Drawing – TORMAX 1201SLC "Slim Line Cover"

Single
Pairs
Double Egress

Specs

TTX 1102 Swing Door Example

 

TTX 1102 Swing Door Operator

Side Load Cover

Swing Door Operator Slim Line Cover

Slim Line Cover

Swing Door Operator Slim Line Cover

Slim Line Cover

The TTX 1102 low energy swing door operator is a low cost, easily adjustable automatic door system. It delivers exceptional long lasting performance, and meets ANSI standard A156.19 that specifies opening and closing speeds as well as force requirements. This non-handed power open, spring close mechanical operator is applicable to interior and exterior doors up to 48" wide and weighing up to 275 pounds. The Tormax TTX 1102 Swing Door Operator incorporates a ¼+ HP DC motor with reliable rack and pinion mechanics coupled with a programmable microprocessor controller. The TTX 1102 is the best solution on the market for conformance with ADA (Americans with Disabilities Act) requirements.

First Class with Luxury Features!

By means of the programmable microprocessor controller the intelligent self-learning swing door operator will auto-configure to meet your specific application requirements. At what speed should the door open? How wide should it open? How long should it remain open? How fast should it close? The Tormax TTX 1102 Swing Door Operator is a modular drive of superior Tormax quality and unmatched features. The basic unit allows for 24VDC activator, two push plates and a reactivation sensor. On-board provisions for door status, battery backup and additional modules. The basic unit comes standard with built-in "Open/Timeout/Close", "Sequential", "Push and Pull" and "Power Assist Close" functionality. Additional functionality can be simply added via on-board modules as required by application and or by design. The system provides for auto-diagnostics for quick and easy trouble shooting. ANSI/UL 325, UL 10C/NFPA252/ULC S104, & UL 228/ULC S133 listed for smoke and fire door applications for both United States and Canada. Fire rated drive assemblies are available with a 3-hour fire resistance rating.

Features & Benefits

Brochure

Drawing – TTX 1102 "Side Load"

Single
Pairs
Dual Independent Operation
Double Egress

Drawing – TTX 1102SLC "Slim Line Cover"

Single
Pairs
Double Egress

Specs

TORMAX iMotion TN110 In-Floor Swing Door Operator

 

TORMAX iMotion TN110 In-Floor Swing Door Example

 

The iMotion® TN 110 In-Floor swing Door Operator (High and Low Energy) is the best choice for door automation in demanding architectural and application situations. This unique operator is in floor and hidden from view. It is the perfect answer for maintaining the architectural integrity for both new buildings and older buildings. The iMotion® TN 110 Swing Door Operator (High and Low Energy) is approved for use in buildings recognized by the Historic Preservation Society.

TORMAX new iMotion® TN110 In-Floor Swing Door Operator (High and Low Energy) was designed for rigorous conditions of commercial use for doors weighing up to 1000 pounds. With a fully concealed, in-floor electro-mechanical operator, the drive offers invisible power that is dependable and adaptable. The iMotion® TN 110 In-Floor fully programmable dual purpose operator can be configured as a high energy swing door operator complete with safeties or as a low energy ADA swing door operator.

The most advanced concealed in-floor swing door operator in the world today: iMotion® TN 110 In-Floor swing Door Operator (High and Low Energy).

  • Approved for use in Historic Buildings
  • Conforms with ADA guidelines
  • Surface or flush mount floor boxes
  • Smooth and silent operation
  • Programmable iMotion® microprocessor control that provides flexibility during system configuration
  • Unlimited application flexibility, provides for personalized programming, exceptional safety and monitoring features
  • Simple operator adjustments due to “Teach-In” a self-learning door control commissioning program, establish door opening and closing movements without the use of maintenance prone cams, magnets and/or mechanical switches
  • Auto-diagnostics for quick and easy trouble shooting.
  • ANSI/UL 325 listed for both United States and Canada
  • Dual purpose operator, meets ANSI standards A156.10 and ANSI standards 156.19
  • Concealed cast iron door shoe for tempered glass, extruded, formed and solid custom doors weighing up to 1000 Lbs.
  • Commercial grade door pivots for doors with slender bottom door rails and/or patch fittings with shallow web depth
TORMAX iMotion TN110 In-Floor Swing Door Details

 

Features & Benefits

Brochure

Drawing – Heavy Tempered Glass, Extruded, Formed and Solid Custom Doors

Single
Pairs
Appendix
Installation/Facilitation Guidelines

Drawing – Slender Bottom Door Rails and Patch Fitting Systems

Single
Pairs
Appendix
Installation/Facilitation Guidelines

Specs